[Jewelry making - Article 00445] - Re: [Orchid] Sandblasting

[Noel Yovovich]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    I'm late coming in on this (been out of town), but I want to add to
    the previous posts-- As you may have noticed, you can mask with
    anything with a resilient surface. Ordinary white glue such as
    Elmer's works very well, as does latex masking fluid (frisket),
    though one coat alone will not hold up with much pressure. You might
    want to try Formaline tape, too. Even paint pen will work, for a
    very light blast. 

Noel



____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________