[Jewelry making - Article 00316] - Re: [Orchid] Jeweler's Work Bench

[DAVID KEELING]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Greetings all, To add to the discussion about the "ultimate
    workbench, spare no expense", check out the following link.
    http://www.boley.de/pBilder/wgr602060.jpg I have seen one in action,
    and they are...astonishingly wonderful.  Hydraulic lifts operated by
    foot control will adjust the height for varying applications. Add a
    bank of drawers, extra shelving, and get this....a flush-mounted
    power-hone. The motor mounts below the benchtop, allowing you to
    polish gravers at your working eye level. These guys are "gear
    heads". If I had this bench, I'd burn mine. (Come to think of it, I
    have already done some of that!) They do speak English, but the
    English website is still under development, so you'll have to bear
    with the Deutsch for now. Good luck with your pursuits. David Keeling 
    www.davidkeelingjewellery.com



____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________