[Jewelry making - Article 00311] - Re: [Orchid] CNC for Green Man

[Tim Blades]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Hello Andrew , I carve waxes by hand and also have a 2 1/2 D scaning
    and milling machine that will pruduce a 3/4" carving wax for you for
    a couple of hundred pounds .(I am in England by the way). The only
    drawback is that it will not have any undercuts, these would have to
    be put in by hand afterwards but at least you would be able to
    continue them off the rest of the carving. I could do this for you or
    you could do it yourself if you feel happy about doing it. Sorry
    about taking a long time to reply , major systems crash ! lost
    drivers etc.If you are interested contact me off list at 
    Tim AT bladest.demon.co.uk Tim. 


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________