[Jewelry making - Article 00181] - [Orchid] Jeweler's Work Bench

[Bill Bates]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========



    I bough the Delux Jewelers Bench Model # BN250 two years ago and is
    a great piece of equipment. I was able to buy it at the drop shipment
    rate which was less shiping and some more, cant quite remember how
    much more but it was enough. I picked it up at the factory in Los
    Angeles north end. It comes broke down and was simple to assembly. I
    made a fitting to hold my victor block and a tray platform that sets
    on top of the tray out of 1/2" plywood and put a small edge around so
    pieces would.t roll off onto the floor. I had used a 5' oak La school
    oak desk for years but I have to admit the Jewelers bench Is great.
    You cant go wrong buying it If you live in the L.A. Vinicity ask them
    if you could buy it at the drop off rate. Yours Billy S. Bates


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________