[Jewelry making - Article 00123] - [Orchid] Brown spots after tumbling

[Jumping Jack Design]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Hello, I have consistently been having a problem post tumbling that
    consists of a brown filmy type of residue that appears about 2-3 days
    after my final tumbling in porcelain is complete.  I originally
    thought this was due to my applying silver black to the pieces prior
    to going in the tumbler, but it appears only on some pieces and not
    just where it has been applied.  Could this be due to my water? Any
    ideas or suggestions would be much appreciated.  I am using a
    vibratory tumbler. Thank You! Alana Berg

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________