[Jewelry making - Article 00008] - Re: [Orchid] CNC for Green Man

[Kim Lilot]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Drew- There's no getting around the fact that if you want
    3-dimensional figurative craftsmanship you have to carve it by hand.
    Lost-wax process is the most efficient. I highly recommend Blue
    Carvex. It's a challenge but that's what makes our work enjoyable. 

    See my website (under Recent Works-Gargoyles) for examples of what
    can be achieved. 

Good Luck.
Kim.
www.kimericlilot.com

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________