[Jewelry making - Article 00914] - [Orchid] Soldering stainless steel

[Scott Damschen]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    I would be curious to know if anyone has any tips for soldering
    stainless steel reliably with a low temp solder (in the 400 degree
    range), preferably a paste type solder that will closely match
    stainless or polished high carbon steel. In addition to learning
    about jewelry I am also interested in bladesmithing and a low temp
    solder is critical so I don't loose the temper in the blade. I am
    amazed that such a fabulous site such as this exists for people
    interested in jewelry and working metal. 

Thank you
Scott Damschen
Tucson AZ     

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________