The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Single ventilation system  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: Noel Yovovich
Date: Tue Feb 04 11:25:25 2003
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


>      How about it everyone - how many of you work without an adequate
>     ventilation system? 

    I think the details of my vent are in the archives, but I can't
    ignore a challenge based on my own "survey"! I have a very effective
    vent system that looks like hell, but it was cheap and easy. I bought
    an enclosed blower (round inlet, round outlet, powerful and quiet)
    from American Science and Surplus for $15. They don't currently list
    them in their site or catalog, but something similar should be
    available from Grainger or other supplier. I used dryer hose, the
    flexible round metal kind, and hose clamps plus duct tape to run from
    the fan out, and from my desk, um, bench to the blower, so the fan
    can sit still, and I can move the intake. At the intake end, I used
    heating and cooling duct parts from the home center to expand the
    hose to a galvanized steel box, maybe 10" x 15", that sits right
    behind where I'm working. Smoke and fumes make a straight line right
    into the vent. The fan is quiet, but the air is noisy, so I plugged
    it into a switch which in turn plugs into a power strip conveniently
    placed so I can turn it on and off as needed. This doesn't vent my
    pickle pot, but I use citric acid, and keep it covered. I don't
    actually do much buffing, believe it or not. So this setup works well
    for me, and cost almost nothing. I already had a roof outlet for my
    ceramic kiln's vent, so I just switched it over. I feel very
    comfortable knowing that the fumes are removed, not just diluted. 
    --Noel 


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________


  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project