The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Titanium ring removal  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: Reactive Metals
Date: Fri Jan 17 22:28:43 2003
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    My, my, amazing stories you have to wonder where these ideas come
    from.  A sliver of metal I guess could do that.? Any metal could do
    that. Why just the mystical titanium. It is not invisible, even to
    x-ray. Now, remember this is the same stuff they are going to use to
    replace your hip, screw into your jaw for a dental implant, screw
    your skull fracture back together and pin that broken bone. The
    oxide, you know, that titanium white pigment you can buy, is in
    powdered instant drinks, makeup, sunscreen, toothpaste, ceramic
    glaze the list goes on and on. 

    Two caveats: Ok, so if you are grinding titanium or any other metal
    for that matter and you have smoke and sparks. DO NOT BREATH THE
    FUMES. That's the rule. Does anyone mask up every time they go to
    the grinder? Noooo... well, yes, maybe, not.. gee I never think of
    it. Yeah, so think about it. 

    Titanium will burn. Now, you probably won't ever light a piece of
    sheet metal on fire. It does not even melt until 3038=B0F(1668=B0C).
    The danger is with piles of very fine filings or turnings in a
    factory type setting. I have filed up a pile of dust and taken it
    outside and lite it up with a torch. Behold just like a sparkler. In
    fact titanium powders are used in fireworks. If a small fire starts:
    Do not put water on it. It could explode. Use a dry fire
    extinguisher or salt, or just let it burn out. 

    If you are going to turn it there are some guides about tools,
    cutting angles, speeds and lubricants. Check your references and
    know what you are doing or tool life will be short. Bill

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________


  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project