[Jewelry making - Article 00358] - Re: [Orchid] Making your own flow thru system for tumbler

[Don Rogers]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


>     9) The only other thing I did wrong was to mix my stainless shot
>     with my polished steel shot.  It rusts.  I'm going to buy all
>     stainless shot so I dont have to do clean up after I tumble. 

    Randy, I keep a jug of burnishing soap solution that I store my
    tumbling shot in.  It has been almost three years since I used it
    last, and it is still bright.  I never had luck in drying the shot
    and keeping it from rusting, even the stainless steel shot, and even
    while the store was going and I would use every week or so.  Storing
    it in the burnishing soap seems to solve the problem. 

Don

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________