[Jewelry making - Article 00316] - Re: [Orchid] Stone Carving

[Douglas Turet]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


>     Here's a question. Who can cut a precision hollow out of a 12x14
>     black onyx? I do a little stone cutting myself, however this is
>     out of my league and i believe that an ultrasonic drill may offer
>     the best remedy." 

    Hi Bruce, If no one else replies, I can help you out with this. Just
    let me know what sized hole/hollow you'd like, whether you'd like
    the inside walls finished, and what what thickness you're after,
    okay? 

All my best,
Doug Turet
Douglas Turet, GJ
Lapidary Artist, Designer & Goldsmith
Turet Design
P.O. Box 162
Arlington, MA 02476
Tel. (617) 325-5328
eFax (928) 222-0815
anotherbrightidea AT hotmail.com

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________