[Jewelry making - Article 00242] - Re: [Orchid] Replace the chuck on a low end bench drill press?

[Tim Goldstein]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Now you are talking a language I know! The 33 is a 33 Jacobs Taper
    which will usually be abbreviated 33JT or J33. I just pulled out my
    MSC catalog (4-1/2 thousand pages and they are happy to send you one
    free) and looked up a few part numbers. #98759061 is a Rohm keyless
    for $73.18. It is considered an economy chuck, but is made in
    Germany. I have a much bigger version and it is a nice chuck.
    #08597247 is USA made Jacobs brand keyless high precision for
    $176.47. #08502247 is an Accupro for $53.73 which is a "Brand name"
    Taiwanese chuck. Normally very nice items for the money. If you go to
    the MSC site www.MSCDirect.com you can put the part numbers into the
    quick search and see the pictures. 

Tim
[Denver CO]


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________