[Jewelry making - Article 00192] - Re: [Orchid] Attaching findings

[dmblow]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    I use the one-piece nickel findings on my work.  I work in base
    metals and apply heat patinas to my pieces.  High temperature
    soldering ruins the patinas I have applied, so I use a lead solder
    that flows at low temperatures (400 F.) These low temperature solders
    are readily available from Rio, Frei & Borel, or any other supplier. 
    I also use a small tip to concentrate the flame only where I am
    attaching the pin back, and premelt the solder onto the piece before
    applying the pinback.  Be sure to open the pinback and move the pin
    AWAY from the flame before attaching, or it will anneal no matter
    what you do. 

Donna Blow, dzines by donna
dmblow AT ix.netcom.com

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________