[Jewelry making - Article 00068] - Re: [Orchid] K & D Tool question

[Lisa McConnell]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    jan, sounds like you have a set of bezel punches, used to secure
    stones in bezels instead of burnishing, you just tap the bezel in one
    pop..that's my guess without seeing your tool....i don't remember
    ever having instructions for any tools in my 21 years with the
    exception of flex shaft, oven and steamer,,in fact a friend bought a
    store that a jeweler had left quite a bit of tools and she's ask me
    to come id them...your not alone. good luck lisa

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________