The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Inkwell lid  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: Kevin
Date: Mon Nov 04 21:56:36 2002
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Margery, any engineering shop should be able to do this for you,
    cutting threads is so fundamental in lathe work.  They'll want to
    know what threadform and pitch you want..... well, you'd best discuss
    it with them, but for something soft like silver you'd want a coarse
    thread rather than something fine, and perhaps the coarse threads
    normally used for cast-iron would be appropriate.  Might be a pricey
    operation, especially if they have to make up a soft faced fixture to
    hold the silver without marking it.  Since you're asking for help I
    assume there's no home machinist that you know of? 

    But wait, there's another way, which may be more appropriate for a
    hand crafted piece.  In his "Jewellery Techniques" I'm sure that Oppi
    Untrach describes handmade threads.  You wind round wire around the
    male part and solder in place, to make the thread on that piece. 
    Then wind a separate length on top, lying in the grooves, carefully
    remove it by unscrewing, and solder it into the female portion. 
    Never tried it myself though. 

    Is this to be a travelling inkwell?  Seems to me that desktop models
    usually have a hinged lid. 

Kevin  (NW England, UK)

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________


  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project