[Jewelry making - Article 00103] - Re: [Orchid] Sanding and finishing epoxy

[Allan Heywood]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    There are stacks of different epoxy resins available Bruce - you
    need the hardest-curing marterial you can get hold of and you need to
    make sure that it IS cured properly. How thick is the material you're
    trying to wet-sand? It sounds like the surface isn't properly cured,
    allowing the silver dust to be rubbed into it. Are you air or oven
    curing it? 

Al Heywood 

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________