| |
|||
| The Gem and Jewelry World's foremost Resource on The Internet. |
| Re: [Orchid] Gemstone windows | ||
|
[Thread Prev]
[Message Prev]
[Date Index]
[Thread Index]
[Message Next]
[Thread Next]
From: wemery AT earthlink.net Date: Fri Nov 01 23:27:10 2002 |
||
========[ Invite a Friend - http://www.ganoksin.com/invite.htm ]======== Dan, your assumptions are correct on all counts For any given transpar ent material ther is a set of angle to be used when cutting the pavilion that should be closely adhered to That's a general rule, but not absolute Consider it correct for most ofthe goods you are likely o see, especially commercially cut goods Too low an angle at the culet will result in a "window" or "fisheye", where light leaks out at the bottom, allowing the viewer to see right through the stone (you can read fine print through the table) Also, too steep an angle results in an overly deep stone In either case, one does not get their money's worth In the case of the shallow stone with window, if it is properly recut, the diameter must decrease and the weight will also decrease In the case of the overly dep stone, the depth will decrease and the weight will still decrease Knowledgeable buyers know the value of different goods, and we assume proper cutting Poorly cut stones should be discounted a lot Native cutters are paid according to the total finished weight they produceGenerally inexpensive goods, or at least they appear to be The cost of recutting the goods to proper proportions, so the true beauty is displayed is NOT inexpensive, because one must pay a skilled cutter and eat the weight loss as well Good quality and good cut deserve their place at the top of the list, and there are few bargains there Why should there be? Excellence is reflected in the cost, just like in automobiles and everything else Surprising how few jewelrs understand this and even fewer can demonstarte it to their customers Wayne Emery ____________________________________________________________________ T h e O r c h i d L i s t Open Electronic Forum for Jewelry Manufacturing Methods and Procedures ____________________________________________________________________ Orchid FAQ: ~ http://www.ganoksin.com/orchid/faq.htm Orchid Archives: ~ http://www.ganoksin.com/orchid/archive Orchid Galleries: ~ http://www.ganoksin.com/orchid/gallery.htm Invite a Friend: ~ http://www.ganoksin.com/invite.htm ____________________________________________________________________ Tips From The Jeweler's Bench - Article Archive ~ http://www.ganoksin.com/borisat/tip_sear.htm The Jeweler's Selected Bibliography List ~ http://www.ganoksin.com/jewelry-books Buy Orchid Jewelry: ~ http://www.ganoksin.com/shop ____________________________________________________________________ -Unsubscribe: -Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank ____________________________________________________________________ |
||
| Navigate: | ||
|
||
| Orchid Resources: | ||
|
Join & Post Invite a friend to join Orchid F.A.Q Galleries BenchExchange Orchid Message Archives [Subject Index] [Date Index] Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!
|
||
© Copyright 1996 - 2008, The Ganoksin
Project