The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Any ideas how to file silver  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: JoJu428
Date: Thu Oct 31 23:42:03 2002
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


>     I'm thinking of buying a pair of retaining ring pliers (that open
>     when squeezed) and coating the tips with plastic or epoxy. I 

    Dear Dave and others, If  I'm finishing a bezel cup that is to be
    soldered onto a piece, I mark the center of the cup with a transfer
    punch (these come in a set of sizes) and then drill a small hole
    dead center to enable mountin g the cup on a screw mandrel. Place the
    mandrel (and attached cup) into the handpiece and rotate the cup
    against a series of abrasive strips mounted on a tongue blade or other
    supporting flat stick. This way I quickly get a fine finish on the
    bezel cup. 

    If I am finishing a bezel ring (no bottom) I place this on a tapered
    wooden mandrel which I have previously fashioned from a wooden dowel
    or chop stick and which has been modified to enable chucking in the
    handpiece, and I finis h these the same way as above. 

    ..." A great Orchid tip I picked up (thanks, whoever you were) was
    to use a brown rubber gum art eraser to hold small flat pieces on my
    sandin g block." 

    For filing or finishing flat pieces I attach a cardboard throw-away
    device used in the dental office to hold bitewing X-ray film in
    position- called bitewing tabs. There are adhesive wings which are
    pressed against the upper surface and a vertical piece  which you
    hold with your thumb and forefinger to allow moving the metal piece
    back and forth against various abrasives or files. Ask your friendly
    Dentist for some samples and give it a try. 

For what it's worth,  Joe Dule

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________


  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project