[Jewelry making - Article 00447] - Re: [Orchid] Still Need Etching Company

[Pat Topp]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========



HI!

    I used to use International Etching Co.  I can't remember where for
    sure, but think it is Connecticut?  Some place out there.  They can
    etch completely through 20 ga. with very sharp definition.  They
    suspend the sheet vertically, and use high pressure guns to shoot the
    acid against the metal, which gives as sharp an edge as sawing
    through.  
    Pat Diacca Topp 

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________