[Jewelry making - Article 00372] - Re: [Orchid] Micro Milling Machines

[David Blair]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    W.H. Both Antares and Bits and bits can supply you with small
    engraving bits MSC is an excelent sorce of all other tooling. The
    biggest problem with the taig mill is the lack of anti backlash nuts
    at least last time I looked. And I prefer Rams, Deskproto, and Visual
    Mill to Bob cad. If I can be of any other help please contact me off
    line. David 


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________