[Jewelry making - Article 00077] - Re: [Orchid] Ultrasonic cleaner

[Richard Whitehouse]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    No I am not putting my work in the bottom of the cleaner. The
    instructions state very clearly that this would seriously damage the
    cleaner. I use the cleaner mostly for removing polishing compound. I
    am beginning to realise that the tiny particles of abrasive compound
    are rubbing against the polished surface of the work and creating
    tiny scratch marks. This means I need to change the fluid every time
    it gets at all dirty. Seems wasteful on cleaning fluid! 

Richard

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________