[Jewelry making - Article 00061] - Re: [Orchid] Etching with Press-N-Peel

[Donna Wilson]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


>           I'll appreciate any help other Orchid members have to offer. 

    When you photocopy onto p-n-p, hold the copy up to the light, if you
    see open spaces, the toner is not dense enough so turn the darkness
    up, test first on regular paper for darkness. 

    If you have air bubbles in the p-n-p where the resist should be, that
    will leave holes . You can cover up holes with nail polish. 

    Make sure the metal is very clean before application of p-n-p, a
    final rinse with alcohol sometimes helps. 

    I've gone through over a hundred sheets of this stuff without
    problems. Donna in VA 

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________