[Jewelry making - Article 00014] - Re: [Orchid] Etching with Press-N-Peel

[ARands]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Hi Joan.   I have been etching with PNP  with no problems.  However,
    I  wonder if the Lazer jet ink could be the problem.   Perhaps it
    does not hold up as well as the ink in copier machines.      I have
    been making the transfer with a copier machine.  Although I have a
    Conon copier, I don't  mine  for fear of something going wrong, but
    take my stuff down to the local copiers.    The resist holds up just
    fine.  You might try  the copiers and see if that  makes a difference.  
    Hope this solves your problem.  Alma

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________