The Gem and Jewelry World's foremost Resource on The Internet.
[Orchid] Translucent cab settings  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: John Burgess
Date: Fri Aug 02 00:07:19 2002
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


>     Sometimes I'll pierce something in the back of a closed back
>     setting to reveal the back of the stone in an artistic way 

    I fail to see how this could do anything other than enhance the
    setting.  But I would go further and say that a pierced back of the
    bezel cup would only be really effective if the stone was very
    translucent. Thus light could shine through the piercing and the
    pattern would come up as a rather pleasant if ghostly 'picture' on
    the face of the stone.  However, this would only work if the pierced
    pattern were simple - say like a cross; a star, an initial, etc.  So
    the cabochon should be of a reasonable size and the back of the stone
    as polished as the front. I have used particularly translucent fine
    green jade for this purpose with the back of the bezel cup no thicker
    than 1 millimetre; I prefer 0.5mm.  Any thicker than 1mm and it looks
    ugly. 

    Off the subject;  One or two kind people have voiced concern in that
    they noticed I haven't contributed much lately, and have wondered
    about my welfare, and I thank them for their caring.  In fact, I am
    alive and as well as might be expected at my age (nothing wrong that
    50 years wouldn't cure) and living a quiet happy life in the village
    of Mapua.   I have been working with jewellery for about 28 years,
    but at nearly 81 find I am no longer quite so interested, though I
    still eagerly absorb my daily 'fix' of Orchid.  One of the reasons is
    that many of the questions have been answered so many times in the
    past that I now leave them to others.  But if there is anything to
    which I feel I can usefully contribute, I will do so. -- Cheers for
    now, 

John Burgess;   johnb AT ts.co.nz of Mapua, Nelson NZ

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________


  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project