[Jewelry making - Article 00004] - Re: [Orchid] Polishing Pewter Castings with a Vibratory Tumbler

[Tom Manson]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Fernandi, I use a crushed walnut shell - rouge media to polish my
    handgun brass in my vibratory tumbler.  When the media is new, I can
    usually clean up a couple hundred shells in about 1/2 hour to 45
    minutes.  This is a typical ammo ploishing media available for about
    $7 a gallon (a few pounds) and that lasts me teens of thousands of
    rounds (shells).  Any gun store should carry it. Tom

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________