[Jewelry making - Article 00725] - Re: [Orchid] Mixed metal cleaning, clarification

[Marilyn M. Smith]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Why don't you drop some mixed scrap of the metals that you use into
    different mixtures and see what works the best with the least harm?
    Tarnex silverware cleaner will work on the silver, copper and brass
    and I suspect that it will not hurt the anodized aluminum. I think
    that the most dangerous thing to do to the anodized aluminum would be
    to use anything that would scratch the surface. Have you considered
    using Renaissance Wax on all of the parts? Marilyn Smith

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________