[Jewelry making - Article 00196] - Re: [Orchid] Preventing fused catches

[Thomas Timms]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Greetings Dave I have had good luck with using 'White-Out', you know
    that liquid correction stuff in a bottle. I apply a couple of thin
    coats, letting each dry before the application of the next. If you
    fine sand the solder surface the 'white-out comes off real nice. I
    can't say this was my brainstorm though, my daughter gave me this
    technique who in turn got it from her instructor. I hope it helps. 

    Tom Timms In Arizona were the fires are out the air temp is hot 
    and the monsoons have added their humidity.

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________