[Jewelry making - Article 00022] - [Orchid] Roller mill prep

[Blitz59194]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Hi all! I bought a roller mill awhile back and haven't used it yet.
    There were few directions with it other than the usual oiling of the
    rollers for maintenance, but my main question is how to get the gunk
    cleaned off it as the whole thing seems to be packed in petroleum
    jelly. What do I use to get this cleaned up and the unit ready for
    use? The information I've gotten on this board has been wonderfully
    useful during my starting attempts at silversmithing...Thank you,
    thank you! 

Sue in Saskatoon where it's breezy and cool.

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________