[Jewelry making - Article 00000] - Re: [Orchid] White Gold Casting Alloy

[Joseph Tanti]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Dear Alan, Your problem seem to be for so many other artificers like
    us, as the main desperate casting and fabricating problem for white
    gold. 

    I would suggest to contact LacyWest Supplies, Vancouver,  Canada,
    and ask them about the Italian White Alloy: Italian White alloy -
    This is the alloy we recommend for casting and fabricating 10K to
    18K white gold. If you are casting only, that is, you will not be
    rolling or fabricating after you alloy the white gold, a most viable
    alternative is our # 915 10-18K White Casting Alloy. Specifications
    and instructions for the #915 alloy are here:
    http://www.lacywest.com/alloy915.htm 

    Hope that you find the help you are after. 

JOSEPH TANTI, MALTA EUROPE
http://jostanti.cjb.com 

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________