[Jewelry making - Article 00948] - Re: [Orchid] Inlaying silver in gold and vice versa

[John Burgess]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    G'day; My suggestion is that you do the engraving fairly deeply then
    have the ring fairly heavily silver plated.  The non required silver
    plating would be abraded off  and the revealed  gold carefully
    polished, leaving the engraving silver. 


Cheers for now,
John Burgess;   johnb AT ts.co.nz of Mapua Nelson NZ 

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________