[Jewelry making - Article 00905] - Re: [Orchid] Casting stainless

[mike fritz]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    The dental industry has been casting nickel/cobalt and or
    chrome/cobalt aloys for years.  the alloy had cost (10-12 years ago)
    about $9-15 per 16oz pound.  Find a framework lab and you could
    probably get the "once cast" mistakes for the taking or a very low
    price.   mix this metal with "virgin" metal to insure proper trace
    metal content. These alloys can be torch cast or induction cast.
    check with the lab tech as to technique for the alloys you get.
    Talladium, Ticonium, Vitalium and a host of lesser names are
    available. Hope this helps Mike & Dale, ultrasonicrepair.com

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________