[Jewelry making - Article 00887] - Re: [Orchid] Calculating metal gauge

[Jerry & Norma Holt]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Sherrie, You don't need calipers to do what you want tot do. Get a
    standard sheet and wire guage which should be available in any good
    hardware store or wherever you might buy the vernier calipers. If you
    have Rio's 2002 tools and equipment catalog, they're on page 288. 

Jerry in Kodiak

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________