[Jewelry making - Article 00545] - Re: [Orchid] Making tiaras

[Ruslana Zitserman]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Hi Dan, I just made a couple of tiaras for a bridal boutique. For 
    support/base I used a 1 memory wire and 1 21 Ga sterling wire
    threaded through 6 Swarovski diamante stones at equal intervals. In
    between the diamantes I covered each wire with liquid silver beads.
    You can pull the silver wire into a crown-like triangles add some
    crystals, dangles, etc. The nice thing is that the memory wire can
    stay on the head without any pins, and then you can wear the tiara 
    as a neckalce too. 

Regards,
Ruslana

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________