[Jewelry making - Article 00934] - Re: [Orchid] Ventilation / Fume Extraction

[Thomas Timms]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Greetings All, I had to put my 2 cents in here. I use a shop vac for
    fume extraction. I have a metal end for the intake hose which sits
    just above my brazing area (about 6"). Don't want to burn down my
    garage, especially after I just fixed it up. I also have a hose
    connected to the exhaust, running to the great outdoors. I do not
    create jewelry on the same scale the majority here it seems to serve
    the purpose for my needs. (I am a weekend Jeweler). Just a
    suggestion. I'll go back to slepp now. 

Tom Timms
Arizona, USA
Where 109 deg. has come a little early this year.

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________