[Jewelry making - Article 00809] - [Orchid] Rolling mill questions

[michelle moss]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Greetings all,  After taking 3 months of classes in San Miguel de
    Allende in Mexico, I purchased while still in Mexico, a rolling Mil=
l
    which I have until now not attempted to use. Now I'm wishing I'd
    paid more attention to the lesson in maintenence of the machine.
    It's an " ROAL- R-80 ",and when I run a piece of plate through it,
    The plate comes out "wavy". When inspecting the function of the
    rollers while they are turning I can see they aren't set perfectly
    parallel to each other...and a small gap appears at a certain point
    in the revolution. A simple adjustment is al that is required ,I'm
    sure...but the mill did not come with an instruction manual. Any
    advice before I blindly begin experementing with it??? (this is my
    first attempt at writing into this forum..I've been reading all the
    advice and have benefited greatly from it...thank you all, and thank
    you orchid. 

Michelle Moss

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________