[Jewelry making - Article 00636] - Re: [Orchid] Polishing Problems

[Scott McConnell]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    kerry, first, make sure your buffs aren't contaminated with the
    other compounds your using.(dirty hands can cantaminate) second, turn
    silver as you polish polishing in one direction can cause this haze
    look third, i use green and or black rouge for silver it seems to
    work for me fourth ,if alan revere has a tape on polishing, buy it it
    will pay for itself in the time  you'll save good luck. lisa
    mcconnell ps if ar doesn't have polishing tape he does have books on
    repair and goldsmithing  polishing classes are short take a week 
    end and go to san fran food for thought lm

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________