[Jewelry making - Article 00244] - Re: [Orchid] [Source] Allot of Wax!

[postmaster]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


Hi Guy,

    You can get the kind of wax you are looking for at either 
    http://www.riogrande.com or http://www.gesswein.com .  I have always
    used the green carving was, as it is the hardest and, for me, the
    easiest to see detail in.  I recommend the Matt carving wax over
    either Ferris or Kerr. The Ferris carving waxes tend to be brittle
    and the Kerr has a slight texture to it, rather than being smooth. 
    However, I would try them all to see which one suits you best.  I
    know you will be able to remelt both the Matt and Kerr with some
    success, as I have used both of these in my wax injector.  Good luck! 

Best regards,

John 

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________