[Jewelry making - Article 00506] - Re: [Orchid] Gaseous Metals In casting?

[Anthony Prime]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    We powder coat thousands of pieces monthly and from our experience
    the problems you have come from poor adhesion (Check your ground,
    make sure its clean and well connected) Also "old powder" will not
    gel right when you heat it. lastly make sure your pieces and
    sandblasted and super clean. 

Anthont Prime

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________