[Jewelry making - Article 00341] - Re: [Orchid] Reticulation

[Rex and Gabrielle Merten]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Hi Linda, just confirming what Bericho had to say about using brass
    as a medium for reticulation. One step further is to cast from the
    reticulated brass into silver and gold. The reticulated brass gives
    much deeper and more interesting patterning than reticulated silver
    and gold. One loses very little detail in the casting and the end
    result is quite convincing. Kind regards, Rex in Oz 

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________