[Jewelry making - Article 00303] - Re: [Orchid] Casting torch ingots

[John Burgess]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    G'day; I suggest that the moulds should be fairly warm to hot.  This
    will help the cast and ensure that when you pour in the hot metal it
    doesn't meet with moisture, turn it to steam so the molten metal
    comes shooting out at you! -- 

Cheers for now,
John Burgess;   johnb AT ts.co.nz of Mapua Nelson NZ


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________