[Jewelry making - Article 00298] - Re: [Orchid] Enameling cast parts

[Judy jones]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Your question is not easy as you have not stated all the melting
    temperatures and the type of soler you are using. 

    It seems to me that their is an easier solution.  A cold connection. 

    Heavy gage rings you don't have to solder or use two rings for the
    connection if they are of a lighter gage.  

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________