[Jewelry making - Article 00136] - Re: [Orchid] Rusty, rusty tools/bulk polishing

[David L. Huffman]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Hi Jessica; There are others here who can advise you on mass
    finishing methods (what you call bulk polishing).  But as to the rust
    issue, before you start to oil up the tools, consider using
    electricity to strip off the rust.  I recently posted a desciption of
    the process on this forum, and you can read the article in the
    archives.  Here's the link: 

    http://ganoksin.com/orchid/archive/200110/msg00800.htm 

David L. Huffman

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________