[Jewelry making - Article 00091] - Re: [Orchid] Panels for abstracta display cases

[Amy O'Connell]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Sarah, 	I have an abstracta case and I used black foamcore for the
    bottom front and side panels. I bought large pieces at an art supply
    store and cut them to fit. I also cut and pasted stencils of my logo
    onto each panel. Another idea I had (but haven't used yet) was to use
    photo enlargements printed onto foamcore and cut to fit. The foamcore
    is cheap and light and matches the matte black frame nicely. I put
    shelves underneath to store everything. I purchased all the hardware
    and clips for the foamcore through abstracta. Here's a photo:
    http://ezmo.com/booth2001.jpg 

Amy O'Connell
Amy O'Connell Jewelry
http://LapidaryArt.com

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________