The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Little Torch Oxygen Use  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: Rocklady
Date: Tue Apr 02 23:31:53 2002
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


>      There are hoses made for acetylene, and there are hoses made for
>     fuel gasses (T grade?). They are not under any circumstance
>     interchangeable 

    Hi Doug You are partially correct. Hoses made for acetylene are only
    for acetylene. T grade hose however is okay for either. We phoned the
    welders supply this morning to double check, although we actually
    bought all our supplies from them in the first place. 

    Dan put a splitter on the gas line for the Little Torch so I can
    switch between propane and acetylene. Oxygen is direct for either. My
    Prestolite is only on acetylene with acetylene hose which we would
    have to change if we put a splitter on it in order to use propane. 

    All the gases are outside and piped in through a small hole in the
    wall. They then pipe down into the cupboard and up through a hole in
    my bench. Using a piece of rubber tubing in the holes allows me to
    have my torches standing ready to use. I just pull up enough hose
    from the cupboard for maneuvering my handpiece and solder. When
    finished is stuff the hose back down the hole and the handpieces
    stands ready for use again. 

    Dan also put a fan right in the bench beside my soldering area that
    vents directly outside, flush with the table top. This means when it
    is -30C (22 below in the US) I don't have to open a window to
    ventilate. Also not to noisy. This means my whole shop fits into a
    small what used to be a bar area approximately 8'x8'. 

Karen Seidel-Bahr
the 'ROCKLADY'   rocklady AT nucleus.com
K.I.S. Creations
May your gems always "Sparkle"

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________


  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2007, The Ganoksin Project