[Jewelry making - Article 01186] - Re: [Orchid] Hard wax fixture?

[JoJu428]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


>      What I'm looking for is something that is hard and durable, but
>     capable of being removed from inside the work with a minimum of
>     trouble 

    I don't know if this will fullfil your requirements, but the thought
    I had was the use of a plastic ball which could allow the buildup of
    your knot, and then could be burned out (outdoors) at a temperature
    which would be low enough to satisfy your other requirements. PS May
    I say I enjoyed viewing the various Turks Head rings you created. 

Joe Dule

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________