[Jewelry making - Article 00342] - Re: [Orchid] Wax injector issues

[JoAnna Kelleher]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Try reducing the temperature. The manufacturer of the waxes that I
    use recommends between 150 and 165 degrees. However, I tend to get
    bubbles at those temperatures. Since then, I dropped the temperature
    to 140 degrees and it comes out perfect every time. Give it a try. 

JoAnna Kelleher
Pearl Exotics Trading Company
Progressive Jewelry - Casting Services - Tahitian Pearls 

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________