[Jewelry making - Article 00098] - Re: [Orchid] Ultrasonic Cleaner formula

[Rocklady]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Hi there When I worked for a time in a Jewellery Store as a sales
    clerk/jewellery repair person (where I finally realized that I did
    not want to do repairs) the boss used Mr. Clean mixed with water.
    Approx. 3-4 Tablespoons to about 1Litre (approx. quart) of water
    should do the trick. You do have to be careful with silver as it can
    sometimes turn it black. And from my hobby of faceting I think you
    should be careful of emeralds as Mr. Clean is a de-greaser and
    almost all emeralds are oiled. This of course is great for rings as
    most dirt underneath is dirt in body oils. 

Karen Seidel-Bahr
the 'ROCKLADY'   rocklady AT nucleus.com
K.I.S. Creations
May your gems always "Sparkle" 

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________