[Jewelry making - Article 00911] - Re: [Orchid] Texturing silver

[Jerry & Norma Holt]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Sally, If I picture it correctly, it sounds like the finish produced
    by using a pointed tool in a hammer handpiece. There is a tip
    available in which a small diamond is set inverted in a steel rod so
    that the culet of the stone becomes the point. Inserted in a the
    handpiece it is worked over the surface of the piece and produces
    what one manufacturer refers to as a "pave". finish. 

Jerry in Kodiak

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________