[Jewelry making - Article 00056] - Re: [Orchid] PMC vs. Art Clay

[Amy J.]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


>         You can torch fire either one with a butane torch from the
>     hardware store.  The piece has to be small, not have a combustible
>     core or stones in it.  Art Clay sells a video that shows the
>     process. 

    Though I agree that one shouldn't torch fire anything with a
    combustible core, I've torch fired several pieces with stones set in
    place with no trouble. Absolutely do not quench the item afterwards,
    however, as it will likely cause the stone to break (just as with
    kiln firing stones in place). 

    FYI, I only torch fire with my cheap propane torch. My oxy/acetylene
    torch has proven to melt items rather easily. 

    Amy J.  

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________