The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Assist sizing bezel set black opal ring  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: Phillip Scott
Date: Thu Jan 10 22:08:39 2002
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Victoria, My name is Phillip Scott.  I have worked as a bench
    jeweler for 30 years. My personal advice is to cut the shank as you
    would any sizing.  Bend the shank so the two pieces fit together
    tightly.  If there is a gap run a saw blade through the seam and this
    will tighten the fit.  Now put a small snipet of solder in the joint.
     Fire coat with boric acid and alcohol or your favorite fire coat.  

    To solder the ring you need to have a small container (metal) filled
    with water.  Something like a deviled ham container works well.  Put
    your ring in the tweezers of a third hand and position the ring with
    the stone submerged under water.  As long as the stone is under water
    it should be safe.  Now flux and solder the ring.  Instead of lifting
    the ring out of the water totally dunk the rest of the ring in the
    water to cool it. Now you can finish the ring.  You may have to have
    the ring a little out of round so you do not put any additional
    pressure on the stone but other than that you should be able to
    finish the ring with out any adverse effects to the stone. I know
    there are many other ways to do this also but this has always worked
    for me. 

I hope this helps,
Phillip Scott GG

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________


  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project